Ram Promaster Forum banner

Dipstick shows too much oil even when following specs

3.4K views 15 replies 13 participants last post by  HippieGypsy  
The business end of the dipstick protrudes into the lower oil pan at the very front of the pan (favors the passenger side a little). So, front to back level of the van affects the measurement with the stick. Overnight draindown will make a little difference as well.

Also, the pan is not particularly strong in the middle, so check that the oil pan has not been dented upwards from an impact, etc. That can displace the oil level upwards too.


♦♦♦ How does van slope side to side effect the dip stick level ? ♦♦♦

Inquiring minds want to know... A rough sketch.

Stop guessing: Find a level spot. Glue on a bubble level (shim to make it read level if needed). Now you will always know that you are close to level whenever you check your oil. ---KenA

ps... The dip stick may be somewhere in the middle of the pan which would lessen the inaccuracy. (I did say approximate).
View attachment 104347 View attachment 104348