[didz1982]

Hi, I have an issue I can’t work out. My report 500a battery monitor is installed but not reading ah and constantly alarming. batt is a 200ah lithium lifePO4. where am I going wrong? I used Larry’s settings above. Please helo, many thanks in advance.

 

[didz1982]

Any chance you installed it backwards?

Picture of the installation? The main screen, the programming screens?

I took this pic. But to best of my knowledge it was correctly installed. I read somewhere in to fully charge the battery and then hold the up arrow for 3 seconds to calibrate it. Will try that next.