Joined
·
654 Posts
Ram/FIAT dimensions
Join the discussion
Recommended Reading
-
Question - plusnuts! Sizes & install
Interior and ShelvingHello friends. I'm getting ready to insulate and bolt in some furring strips for the wall/ceiling paneling on my 2500 high top. Having a really hard time getting any reliable, specific information on plusnuts. I'm looking for sizes and grip ranges on plusnuts for the existing round holes in the...- 38
- 4K
-
Minimum Floor Thickness
Interior and ShelvingMy wife and I are building out a 136" Low Top in the PNW. Our next step is to get the flooring figured out. Since we have a low top, want to keep the floor as thin as possible. Below is my plan for the floor.. I am looking for feed back/shoot holes in my plan. I measured the height of the...- 25
- 662
-
Insulation between cab and cargo area for winter sleeping
Interior and ShelvingI am looking for an easy solution that we can easily put up and take down for sleeping in the winter. We need a lightweight partition to insulate and separate the cargo area from the cab area. Right now we have some big pieces of Reflectix but it's not air tight and the guy building our van...- 31
- 5K
-
orangjul · updated
-
Ventilation- best and/or most innovative ideas you’ve seen?
Interior and ShelvingPlanning for our 159 XLWB build here in Australia and I need to work out ventilation. I figured a discussion about what is best practice for ventilation would be pretty useful. Our van will be used as a base for various out doors games including mountain biking and snowboarding. Summers are...- 4
- 412
-
Wheel Well Water Tank
Interior and ShelvingMight be of interest to someone. These were made for the Transit so I asked if they would fit a PM. Answer I received was, "The tank will fit the Pro Master but would need to be elevated about 4-5” because of the height of wheel wells. Good spot to run water lines and pump." "][/URL] I...- 5
- 2K
Join now to ask and comment!