[medicineman4040]

But this overall design is impressive; hope you all haven't already watched this one:

 

[RDinNHandAZ]

Wow. Now I gotta go completely modify my campervan. This makes my sleeping platform and cooler in my 4 Runner desert 4X4 seem a bit crude!

 

[Melmike]

Just awesome, and the trip that they are on--Argentina to Nova Scotia! I have never heard of anyone driving that far in one trip.


Mike

 

[medicineman4040]

What I like most is his external pop on table. That is something I'd like to emulate.
Please watch at 9:08 where you can see the brackets on the table....where could I get them
and the matching brackets for my sliding door?

 

[keeponvaning]

$120 k will buy a lot of toys for your van

 

[phil]

Something like this,

https://www.amazon.com/Cotowin-Stainless-Steel-Picture-Hangers/dp/B019TRKS7O

 

[medicineman4040]

^Phil, awesome. Ordered.

 

[RDinNHandAZ]

Not to change your order but I bought this and it works really well. Tilt up table to remove. Made for the use.
https://www.amazon.com/Patrick-Meta...qid=1501412718&sr=8-5&keywords=rv+table+mount

 

[keeponvaning]

Old style shutter hangers will do the same thing

 

[phil]

KOV,

Is this the style you are referring to?
http://www.houseofantiquehardware.com/pintle-hinge-parts

MM, I think you will need a backing of some sort to protect the van paint, and don't use those wood screws on the van skin

 

[RDinNHandAZ]

I’d say more like this:
https://www.amazon.com/Stanley-Hard...501435754&sr=8-1&keywords=storm+window+hanger
Or this:
https://www.amazon.com/NATIONAL-SPE...coding=UTF8&psc=1&refRID=G22JV1997JFBKPVG4N2F
Get stainless if you can.
Self tapping stainless screws:
https://www.amazon.com/Stainless-Se...&keywords=self+tapping+screws+stainless+steel
But get a few from the hardware store.

 

[keeponvaning]

KOV,

Is this the style you are referring to?
http://www.houseofantiquehardware.com/pintle-hinge-parts

MM, I think you will need a backing of some sort to protect the van paint, and don't use those wood screws on the van skin

No those are shutter hinges! RD posted a link to what I mean (stainless only tho)

 

[medicineman4040]

The Patrick Metals thing also now ordered.
We'll get several options in and decide.

If we do this the table will extend more outward then width wise if that makes sense, so
can probably get by with one folding/articulating leg.

 

[medicineman4040]

Stainless screws also ordered. Thanks for the link.

Even after all parts/pieces get here it still might not get off the ground.
Poof will have to approve the 'look'. Especially the look of the brackets when
the table is not in use. Low key/smooth will appeal to her.

I did write the German company noted from the video I linked at the beginning of this thread
asking if I could order the hardware. Never heard from them, just so you know.

 

[medicineman4040]

Finally found THE brackets I wanted-
SeaLux Marine Grade Stainless Steel Removable Table Bracket set of 4 pieces
[ame]https://www.amazon.com/gp/product/B0191LZCQ0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1[/ame]

 

[medicineman4040]

What would you put, if anything (rubber gasket?) between the hardware and the door metal?