Inner Tie Rod - Tips / Advice on Replacement
I just replaced both Control arms, Stabilizer Bar Bushings and End links, Struts Springs Bearings, tie rods ends, brake hoses, pads and rotors and failed inspection due to a little play in the drivers side wheel - diagnosed as Inner tie rod
I've searched the forum and found sources for inner tie rod ends. Autozone has a listing Duralast Gold Tie Rod End GES82120 and Rock Auto has MOOG EV801498. NAPA informed me they have one coming out soon, but no p/n yet.
Autozone is loaning me this tool:
Does anyone that has actually done this job have any tips advice on how to do this job?
Thanks in Advance
I've searched the forum and found sources for inner tie rod ends. Autozone has a listing Duralast Gold Tie Rod End GES82120 and Rock Auto has MOOG EV801498. NAPA informed me they have one coming out soon, but no p/n yet.
Autozone is loaning me this tool:
Does anyone that has actually done this job have any tips advice on how to do this job?
Thanks in Advance
1 - 3 of 3 Posts
Joined
·
4 Posts
Hi guys, been out for over a year due to health reasons but i am back helping with tie rod issues, see here (also can advise how to replace everything):
Ram Promaster Inner & Outer Tie Rod Full Set for Steering Rack & Pinion Repair | eBay
For Ram Promaster 1500/2500/3500. These parts will most likely not fit to any other vehicle. Full Set for Rack & Pinion Repair. - Do not have missing parts, hardware or instructions. - Are not used, installed, or disassembled.
www.ebay.com
1 - 3 of 3 Posts
