[flashfyre]

pmc 2016 cargo

When I pry off an internal panel, usually one or more plastic pin heads pop off

I see the pn online is mopar 68094748AA

Usually they are $ 5 or more each on ebay or elsewhere.

On the mopar parts site I can order them for $1.45 ea but they want $ 43 for shipping.

Some posts in the forums have similar issues and part numbers but ...

Has anyone found a good alternative?

Thanks

UPDATE : This is a little funny, so enjoy! I guessed the Mopar parts site had a minimum $ 50 order, so I tried increasing the order count to 35 pins just for fun. Indeed, the parts price went to $ 50.75, but the shipping cost went up to $ 301.91! Sigh...$ 8.60 shipping per pin.

 

[perezoso]

Order 10 for $1 each, plus $7 shipping, here:

http://www.concord-parts.com/chrysler-jeep-dodge-ram/bolts-nuts-studs/pin?page=7

Actually, I just did, since I'm already missing one myself. Will let you know if they come and if they are right.

 

[flashfyre]

Hi Perezoso,

Did the pins match?

 

[flashfyre]

So I took the plunge myself

Concord had to special order the pins, and due to the small weight and size, had to calculate shipping separately and send me a link to pay for shipping via email.

They are the OEM pins in OEM packaging.

 

[samandoliver]

Yeah, Mopar spikes those things.

I needed plastic rivets for my challenger's engine cowl. Needless to say, the Mopar ones were almost $5 PER RIVET which break a LOT.

Harbor Freight had a bag of 100 for like, $7, the riveter was about $10

 

[flashfyre]

These are just push pins, no riveter. I couldn't find anything close in hardware store generics. Sometimes the panels rattle with generics that are even a little different.