[SFProMaster]

Just finished installing the CL Laurence 15”x 30” Sunroof From DK Hardware. Around $300 + shipping. I installed by myself from the inside. Laid the template on the ceiling, traced it out and drilled a small pilot hole. I used 5 heavy duty magnets (4 from Harbor Freight to hold the metal piece in place and moved them close to the jigsaw blade to control chatter. I used just only one Bosch metal blade T118G 36tpi with my 20v DeWalt jigsaw. It cut smoothly and efficiently

 

[SFProMaster]

 

[SFProMaster]