Ram Promaster Forum banner

1 - 4 of 4 Posts

Registered
2019 Ram Promaster 136 HT Gasser Stealth Work Van Weekend Camper
Joined
275 Posts
Discussion Starter · #1 ·
Hello Everyone , need help finding factory replacement on/off button switch for the cargo area strip lights . The best I can find is for the City models physically they appear the same . Mine finally quit after about 10k times of usage , I work out of my van , so every 15/20 mins I'm turning it back on ..arrgh 馃槶 I also have full time lighting and both are needed .
Thanks in advance.

Screenshot_20210501-143147.png

Anyone know if this is compatible with full size Promaster , physically appears the same as mine 2019 1500 136" H.T. Gasser .
 

Registered
2019 Ram Promaster 136 HT Gasser Stealth Work Van Weekend Camper
Joined
275 Posts
Discussion Starter · #2 ·
Still can't find any listing for full size Promaster . Found a seller on ebay , accepted $25 offer for switch listed for a city . I'll update when I receive switch.
Screenshot_20210502-081634.png
 

Registered
MMXVI - L2H2 in IN
Joined
4,556 Posts

Registered
2019 Ram Promaster 136 HT Gasser Stealth Work Van Weekend Camper
Joined
275 Posts
Discussion Starter · #4 · (Edited)
A little late, but I found a cargo light kit for a Promaster and was able to read the part number off the switch, 68257884aa
Here's the instruction for the kit if you need it.
https://s3.amazonaws.com/rp-part-images/assets/272f0edd1c04474da1e9622cfb64549b.PDF
Thanks Phil .. aka Mr Aficionado..
Now I see that the city and Promaster use same switch..... my searching only listed this switch for City's , good to know I've ordered correct part , even though it's listed for a City 馃槉
 
1 - 4 of 4 Posts
Top