Ram Promaster Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I may be purchasing a 2014 Ram Promaster 136" wb short roof but I have found most I am finding at dealers don't have the side window or rear windows as well as the parking sensors. Can all of this be added in later? I know many people say the rear window isn't necessary but I do like to see what behind me at times.

Thanks!
 

·
Premium Member
Joined
·
8,837 Posts

·
Registered
Joined
·
171 Posts
There is a parking sensors kit for Fiat Ducato (X250, 2006-2014 van) in the Mopar accessories catalog, part number 71803466 (it is the same code also for the newer van, the X290). Before Mopar it was branded as "Linea Accessori" Fiat Lancia Alfa Romeo.

Fiat Ducato Mopar acessories (for X250 model): http://www.mopar.eu/PublishingImages/merchandising/fiat_pro/ducato/Fiat-Ducato_Accessori-IT-EN.pdf

Same kit is used for many other models like Fiat 500, 500L, ...

It is sourced to FCA by Meta Sytem S.p.A. and it should be their Active Park 4/14 model.
Here is a link where can be found the installation manual:
http://www.metasystem.it/index.php/msy_ita_en/content/view/full/64493http://www.metasystem.it/index.php/msy_ita_en/content/view/full/64493
 

·
Registered
2014-159 HR in CT
Joined
·
3,689 Posts
Parking sensors: I would suggest aftermarket as mojogoat did.

CRL windows: Rear windows are glued in. MIne are factory, so no experience. Side windows from CRL have a metal frame bonded to the glass when you buy them... just cut the hole (get it right the first time!) and insert, then use provided clamp ring to secure in place. Window install pictured on my website, linked in my signature below. Also, good thread on CRL windows install by Leo, if you search.

Welcome,
Ed
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #7 ·
Parking sensors: I would suggest aftermarket as mojogoat did.

CRL windows: Rear windows are glued in. MIne are factory, so no experience. Side windows from CRL have a metal frame bonded to the glass when you buy them... just cut the hole (get it right the first time!) and insert, then use provided clamp ring to secure in place. Window install pictured on my website, linked in my signature below. Also, good thread on CRL windows install by Leo, if you search.

Welcome,
Ed

I went to the CRL site but there are no prices, any ideas what the 2 rear are worth and fixed sliding side door?
 

·
Premium Member
Joined
·
71 Posts
Winows installed

I just got my CRL windows installed. I got them from a Windshield and accessories place in Montreal called Lebeau Vitre D'Auto.
The passenger sliding door window # FW385R
The left rear door # FW384L
The right rear door # FW384R
All installed for $1746. + tax.
Pretty close to OEM install.
See pictures before and after.
 

Attachments

1 - 10 of 10 Posts
Top