Ram Promaster Forum banner

1 - 6 of 6 Posts

·
Premium Member
Joined
·
13 Posts
Discussion Starter #1
If someone who knows or owns a ProMaster and has the time, could someone provide me the backspacing measuerments?

Why?... I am in deployed to Afghanistan and cant very well do it myself.

I am looking at aftermarket wheels that would fit the ProMaster as well as going to a 16x6.5 or16x8 to run a larger tire.

Thanks for the help!
 

·
Registered
Joined
·
39 Posts
Hello,

We've been putting aftermarket American Racing ATX Series 181 Artillery wheels on our ProMaster Conversion Vans.

Those wheels are:
18" x 8"
5 x 130mm Bolt Pattern
+50mm Offset
6.470" Backspace

Good luck trying to find wheels for this van in the States....These seem to be the only wheels available for the ProMaster and they are back ordered and soon to be discontinued.

If you do find something, be sure to let us know!
 

·
Registered
Joined
·
654 Posts
Here is a site that lists the FIAT Ducato wheel sizes, I believe that the Promaster only uses the larger 5x130mm, ET42-45 bolt pattern as per Brian's statement above.
http://www.carlsalter.com/all-wheel-fitments.html
http://www.carlsalter.com/old_wheel_fitments.html
There is good news and bad news. The good news is that there should be a LOT of wheel choices for the Ducato, the bad news is that those choices may carry a premium in cost as the bolt pattern is primarily a Porsche bolt pattern (but also shared with the Mercedes Sprinter, VW Toureg and Audi Q7).
 

·
Registered
Joined
·
253 Posts
On a related note, does anyone know of a good source for some chrome or S.S. lug bolts? I can't believe they actually put the aluminum rims on with the same ugly galvanized lug bolts you get with steel rims.
 
1 - 6 of 6 Posts
Top