Ram Promaster Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,074 Posts
Discussion Starter #2
Forgot another bit of the puzzled placed onto the 80/20 cabinet.
The surge protector- Progressive Industries EMS-HW30C Hard-Wired
https://www.amazon.com/gp/product/B002UC6RSA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You can see shore power entering the black box on the left, exiting on the right and entering
the box below
And the box with 2 x 30amp GFI. One 30amper goes to aircon and frig and
the other goes to the inverter charger.
To the left of the surge protector and the 30amper box is the ac/dc distribution panel.

 

·
Registered
Joined
·
1,074 Posts
Discussion Starter #4
Last milestone of the day our PM now has lights. Maybe way more light than most would choose for their builds
but we have under platform bed and under big shelf lighting for incidental lighting....the overhead lights for when I drop
something very small on our black floor :( and the big light by the slider can light up the running board and quite a bit outside
when grilling or whatever. So ProEddie your former lights are getting new life :)

 

·
Registered
Joined
·
1,074 Posts
Discussion Starter #6
Thanks ProEddie.
NO dimmers were placed, just time is precious right now, but
I can get at the wires if we want to.
I do have another plan though for the immediacy. I will use
photographic get type sheets cut to fit inside the 'domes' of the
LEDs. I've got a few sheets of filter media lying about that can
quickly/easily come into play. Just the last few days we have focused
on the overall big items like aircon/frig/charger-inverter and even
got the BatteryDoc into play.

I've learned by the many threads here that nothing is quite permanent
in our PM builds.
 
1 - 6 of 6 Posts
Top