Ram Promaster Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. New Member Introductions
    Thanks for letting me join your forum. My work recently received a new promaster high roof that was intended for me to use (locksmith). On my initial test drive, my knees were pushed against the dash making it difficult to operate the pedals. I jammed the seat back as far as it could go but...
  2. Promaster Builds and Conversions
    Working on the partition wall. As you can see there is a small gap on the far left. My thought is to mask with tape then put drywall tap over that, then spackle and paint. But idk if the sparkle would hold up to bumpy driving over time. What are your thoughts? This is going to be in the corner...
  3. For Sale New partition

    Promaster Parts
    Solid Metal partition (no window) that came with my brand new 2020 Ram Promaster 159 WB van. I am converting the van so don’t need it. I removed the partition after purchasing the van so partition has been stored and well cared for. Has a felt like covering on the cab side. I can meet somewhere...
    $400 USD
  4. Promaster General Discussion Forum
    Anyone looking to trade interior cab trim pieces for a partition? In the central california area
  5. Ram Promaster Classified Forum
    Purchase this van new last year and have no use for the metal partition. I recently took it off the van. It’s still inside my van out of the weather. $400 or best offer. Im near Olympia Wa (Shelton). My partition is similar to this picture which I borrowed but without the window. Thanks for looking!
  6. Promaster Parts
    Looking to sell our divider wall, floor mat and plastic wall paneling as a set. Like many, we have no need for it with our conversion. Some discoloration near the base of the divider on the cab side. Looks like the people before spilled their morning coffee. Plastic paneling does NOT cover all...
  7. Ram Promaster Classified Forum
    Came out of a 2018 2500 Promaster high roof. i took it out when i bought the van and now it is sitting in my parents garage in Connecticut. The metal side faces aft and the insulated fabric side faces forward. I don't know what the stain is from, but it is behind the passenger seat. I have the...
  8. Promaster Parts
    With sliding window and fabric lining on inside. Great condition, light wear and stains on inside. Asking $200 or trade for $50 plus the parts you will need to remove and that i'll need.
  9. Promaster General Discussion Forum
    Looking for a partition bulkhead for my '21 PM 3500 Hi roof extended. Please let me know if you have one for sale/ trade in Virginia. Thanks!
  10. New Member Introductions
    New owner in Virginia here. Going from a diesel O3 Dually Sprinter 3500 to a gas PM 3500 hi roof ext. I do have some concerns about the weight limits as I plan to convert my rig into a grip truck for the film industry (which is what I use the sprinter for) Any other grip truck owners here? How...
  11. Promaster Parts
    I have removed my partition and offering it for free to anyone who wants to swap the pillar B trims. I am in Montréal, we can meet and work together on the swap. Let me know if interested. Let me know if you have other suggestions.
  12. Promaster General Discussion Forum
    Any thoughts on this insulated, fabric partition from Overland Gear Guy? Promaster Wall Partition Please be aware that all newly registered members MUST make an introductory post in the Introductory Post Forum as per forum rules. Promasterforum.com Introduction Section Please be aware until...
  13. Promaster Parts
    Full conversion for a crew cab setup in a promaster high roof. Possibly fit a low roof without the top part of the partition. The kit is from Snoeks, comes with all hardware, raised floor section and full 3 person bench seat with seat belt system. Bolts in factory spots on floor and uses...
  14. Promaster Parts
    I've got a like new partition I've removed from my 3500 high roof. I'd like to get $250-$300 for it or a trade for something useful for my van conversion. I'm located in Memphis, TN.
  15. Ram Promaster Classified Forum
    American Van products, all aluminum cargo partition, 2 shelf/cabinet units Fits Ram Promaster City, 2018 year, maybe others Removed from vehicle after 3 months use, almost brand new appearance Retail 362.00 for partition, 421.00 each for cabinet/shelf, 1204.00 original price. Selling for...
  16. Ram Promaster Classified Forum
    Freshly removed from a very low-mileage, very lightly used 2019 High-Roof PM. Ribbed steel on cargo-side with felt application on the cab-side. Excellent / Like New condition. Comes with all mounting hardware. I'm located in Seattle, but will be traveling between Bellingham & PDX a lot in the...
  17. Promaster Parts
    Howdy, like everyone else doing a conversion.... I have a oem partition taking up space that I need gone. Willing to give it away but would prefer to swap someone for the trim pieces this replaces. Shoot me a message if you are interested, i'm located in Edmonton, Alberta, Canada...
1-17 of 17 Results
Top