Ram Promaster Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Engine and Technical Discussion
    I replaced the upper intake manifold on my 2016 ProMaster 3.6, replace the lower and the upper gaskets as well at the same time. I had two broken bolts that I was able to extract with vise grips. I put everything back together after replacing injector number 3, and I made sure to torque...
  2. How-To Forum
    I removed the rear bracket, and the front two 10mm bolts, and I believe all the 8mm x7 bolts. The upper plenum won't even budge. And tips? 3.6 is mounted sideways in here Thanks
  3. Engine and Technical Discussion
    So I looked at a buddies van today it is a 2016 ProMaster 1500 3.6 pentastar. I hooked up my Bosch scanner to it and looked at cylinder number 3 it has no signal going to the injector from what I could see there was no pulse width from the scanner live data. It's got 198327 miles These things...
1-3 of 3 Results
Top