Ram Promaster Forum banner

Search results

1-19 of 19 Results
  1. Jumping in

    Promasterforum.com Introduction Section
    HI there Retired_DIYer. You sound like me 2 years ago. We bought our 159 exd. last year and took our first road trip in May. Just came off our 2nd. Ours is a very simple build but we really enjoy it. We live in southern Indiana. Good luck with your build. There is a lot of knowledge here and...
  2. Weighing in

    Promaster General Discussion Forum
    Bad news. Weighed in at 8040. Now my best girl thinks she has room for more stuff. We need to communicate better
  3. Plugger cup holder alteration

    Promaster General Discussion Forum
  4. Plugger cup holder alteration

    Promaster General Discussion Forum
    Got my cup holders I ordered today MsNomer. Pretty happy. If I was smart enough to give you a like on the forum I'd do it.
  5. Weighing in

    Promaster General Discussion Forum
    Ready to go on 2nd great adventure in Plugger. Going to try and find Tom Sawyer and Huckleberry Finn. Going to stop at Pilot and weigh and see just where we are front and rear. Curious. You can see where the word Plugger comes from
  6. Plugger cup holder alteration

    Promaster General Discussion Forum
    Just looked at your cup holder shelf and I can see why I consider myself a plugger. You sir are a craftsman. Very nice I like it👍
  7. Plugger cup holder alteration

    Promaster General Discussion Forum
    Dang it MsNomer. Couldn't click on your build and get it to come up. Will try again later. At the base of mine I put in 2 screws an large flat washers to hold base down also put a screw in middle cup holder into 3 in pipe. Went out on a coal mine road to congratulate a friend retiring and she...
  8. Hi from Portland, OR!

    Promasterforum.com Introduction Section
    Hi nomadic_jeweler I'm new to the forum myself. A lot of good knowledge here. Good luck on your build.
  9. Plugger cup holder alteration

    Promaster General Discussion Forum
    As with many I’ve read have trouble with their cup holder being too low in their PM. I got to fooling around with scraps I have and found that a Sch 40 3 in pvc will fit snugly into the center cup holder. I cut it 12 ins long and 1 in from the top I put a 3/4 notch. I then made my cup holder out...
  10. Dehumidifier

    Promaster General Discussion Forum
    I may be over kill Phil. I got about the same result with vent open or closed. It is a evaporator type and while I know it’s not as good as compressor style I figured every little bit helps. If you found this post interesting wait to see the one I’m working on now
  11. Dehumidifier

    Promaster General Discussion Forum
    Yes it is under a carport and the roof vent is open My wife came up with the idea and it seems to work. I've asked some more of my travel trailer friends and they don't use one parked. Just curios as to what others do
  12. Dehumidifier

    Promaster General Discussion Forum
    Does anyone use a dehumidifier in their conversation? We have one in Plugger and ever three or four days here in southern Indiana it has to emptied. It is a small single room unit
  13. Oh Lord...Time to choose insulation.

    Promaster General Discussion Forum
    I used denim on my build. Easy to work with and also a good sound deadner
  14. Common issues for High Mileage PMs

    Promaster General Discussion Forum
    HI Bryant I bought my 3500 extended from a expediting company. I call it Plugger and she had 294000 miles on her. It's a 2015 and yes she was a road worrier. We bought it at a price with the idea we could put in a new engine and still be ok. We started our build last summer and took it to...
  15. Anyone else debadge their PM?

    Promaster General Discussion Forum
    Thanks for the tips. Been thinking about doing our too.
  16. ISO factory 159" WB floor panel

    Promaster Parts
    Where are you located? I have one from a 159 ext don't know if you could cut the ext part it's used and has some pallet scares also have the cargo hold downs that go with it located in southern Indiana Oops just noticed your in Ct long way off for a used floor panel
  17. Progress 2017 PM 159 - slow but steady

    Promaster General Discussion Forum
    Thanks. It looks real good. How did you trim out inside?
  18. Progress 2017 PM 159 - slow but steady

    Promaster General Discussion Forum
    jstack where did you get your sliding door glass?
  19. Grumpy

    Promasterforum.com Introduction Section
    No problems with plugger. Grandkids call me Grumpy😊
1-19 of 19 Results
Top